| Item |
Specifications |
| Basic functions |
Control system |
Current Vector General Purpose Inverter. |
| Compatible motor |
Induction motors. |
| Maximum frequency |
Vector control: 0~500Hz;
V/F control: 0~500Hz. |
| Carrier frequency |
0.8kHz~12kHz; Depending on load, can automatically adjust. |
| Input resolution |
Digital: 0.01Hz; |
Analog: maximum frequency×0.025%. |
| Control modes |
Open vector control (SVC);
V/F (scalar) control. |
| Starting torque |
G type: 0.5Hz/150% (SVC); 0Hz/180% (FVC).
P type: 0.5Hz/100%. |
| Speed range |
1: 100 (SVC) |
1: 1000 (FVC) |
| Speed accuracy |
±0.5% (SVC) |
±0.02% (FVC) |
| Torque accuracy |
±5% (FVC) |
| Overload capacity |
G type: 150% rated current 60s; 180% rated current 3s;
P type: 120% rated current 60s; 150% rated current 3s. |
| Torque boost |
Automatic |
Manual 0.1%~30.0% |
| V/F curve |
Straight-line V/F curve
Multi-point V/F curve
N-power V/F curve (2-power, 1.4-power, 1.6-power, 1.8-power, 2-power square)
|
| V/F separation |
Two types: complete separation; half separation. AVR output. |
| Ramp mode |
Straight-line ramp
S-curve ramp
Four groups of acceleration/deceleration time: 0.06500.0s |
| DC braking |
DC braking frequency: 0.00 Hz to maximum frequency
Braking time: 0.036.0s
Braking action current value: 0.0%100.0% |
| JOG control |
JOG frequency range: 0.0050.00 Hz
JOG acceleration/deceleration time: 0.06500.0s |
| Simple PLC |
Up to 16 speeds via the simple PLC function or DI terminals |
| Onboard PID |
Process-controlled closed loop control system |
Auto voltage
regulation (VR) |
Keep constant output voltage automatically when grid voltage fluctuates. |
Overvoltage/
Overcurrent stall
control |
The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to overvoltage/overcurrent. |
| Fast current limit function |
Protect inverter from overcurrent malfunctions. |
Torque limit and
control |
It can limit the torque automatically and prevent frequent over current tripping during the running process. Torque control can be implemented in the FVC mode. |
Power dip ride
through |
The regenerative energy from load compensates the voltage reduction so that the inverter can continue to run for a short time. |
| Timing control |
Time range: 0.06500.0 minutes |
Two-motor
switchover |
Two motors can be switched over via two groups of motor parameters. |
| Fieldbuses |
