INTRODUCTION:

   PulseCAP10 fuel level sensor is designed for precision measurement in all kinds of vehicle tank.
   PulseCAP10 is used as a standard fuel level sensor or vehicle tracking systems.
   Obtain the reliable information about current fuel volume in vehicle tank.
   Define the vehicle fueling volume and detect the fuel theft from the tank.
   To carry out the remote tank monitoring and determine the fuel consumption.

HIGHLIGHT FEATURES:

   Easy Installation
 Intelligent structure with full accessories for easy installation at site

   Smart Firmware
 Smart firmware allows cutting the sensor down to the minimum size (200mm)

   High Stability Output
 Even on rough terrain or in temperature shocks

   High Linearity Output
 Using digital capacitance measurement technology to achieve highest linearity with lowest temperature drift.

   Highest Protection with lead sealing

   Many Output Types
 Frequency, Pulse, Analog, Serial

   Used for many kinds of tank:
 Fuel tank for Generators, Ships, Vehicles, ...
 Fuel tank in Industial Plants...

   Fluids:
 Diesel oil
 Fuel oil
 Lubricant
 Vegetables oil
 ...

SPECIFICATION
 

SENSOR LENGTH	Standard Length: 700, 1000, 1200, 1500, 2000, 2500, 3000, 3500 mm
OUTPUT	Frequency: 50 .. 1050 Hz, 5 Vp-p Pulse Width: 1.7 sec cycle, 5 Vp-p Analog: 1.00 .. 5.00 Vdc RS232: Tx, DS Protocol, 5 Vp-p RS485: Modbus RTU
POWER SUPPLY	8..50 VDC for output: analog, pulse, frequency and RS 232 5..50 VDC for output: Modbus RS485 Current Consumption: max 15mA
PRESSURE/ TEMPERATURE	Vaccuum .. 2 barg/ -40oC .. +85oC
PERFORMANCE	Output Linearity: +/- 0.5% of Span (at 25oC) Temperature drift: < +0.03% of Span per 10oC
RESOLUTION	1/1000 of span
SENSOR MATERIALS	Cast Aluminum, Thermal plastic
ELECTRICAL CONNECTOR	3-way connector, IP67 with 7m PVC cable, 3-core
HOUSING/ RATING	Cast Aluminum/ IP67
PROCESS CONNECTION	4-bolt Flange
ACCESSORIES	4-bolt Flange, Rubber Gasket 5mm, Ruber Gasket 2mm, Flange seal cover, M4 hex bolt. Connector cable with M12 connector (order seperately)
CERTIFICATE	CE-Marking; Standard: EN61236-1