This is the brushless electric powered, radio controlled, almost ready to run 1/10 scale Traxxas Slash 4x4 Platinum Edition Short-Course Racing Truck. This version requires transmitter, receiver, batteries, charger and paint for the body.
FEATURES: Chassis: Nylon composite construction 0.08" (2mm) thick bathtub type
- Drive: Four wheels of chassis
- Electronic Speed Control: Traxxas VXL-3S waterproof, with high-current
connector, training mode, reverse and low voltage detection for use
with 2S and 3S LiPo packs
- Motor: Traxxas Velineon 3500 with ultra high temperature
- Neodymium magnets and high speed ball bearings
- Spur Gear: 45 tooth
- Pinion Gear: 31 tooth 48 pitch, extra pinion gear included for 50+ MPH
operation with extra battery
- Body: Clear polycarbonate with overspray film and window masks
- Bumpers: Front and rear, composite construction
- Shocks: Hard anodized oil-filled aluminum body Big
- Bore with titanium nitride shafts
- Suspension: C-hub design
- Transmission: Ball bearing equipped
- Differentials: Sealed silicone filled planetary gear type, center diff
installs trackside in minutes replacing the Torque Control
slipper
- Ball Bearings: Rubber sealed
- Caster: Non-adjustable
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Tires: Licensed BF Goodrich soft compound Mud Terrain T/A --" (--mm)
diameter, --" (--mm) wide
Wheels: 5-spoke brushed chrome, 0.98" (25mm) wide, 1.4" (35mm)
diameter, standard size 12mm hex, aluminum wheel nuts
Steering: Blue anodized aluminum steering blocks, spring loaded servo
protection, high torque digital ball bearing servo
INCLUDES: ARR Traxxas Slash 4x4 Platinum Edition Short-Course Racing Truck with
steering servo, decals, aluminum C-hubs, steering blocks, rear hub
carriers and axle nuts, extra swaybar set, Big Bore shocks, clear
body, Velineon 3500 brushless motor and instruction manual
REQUIRES: Radio: 2-channel transmitter with receiver
AA Cells: Eight for transmitter
Battery:
Charger:
Paint: Polycarbonate safe spray or brush-on
SPECS: Vehicle-
Length: 22.36" (568mm)
Width: 11.65" (296mm)
Height: 8.42" (214mm)
Front and Rear Track: 11.65" (296mm) distance between outer edges of
wheels side-to-side
Ground Clearance: 2.5"
Body-
Length: 21.25" (540mm)
Width: 11.5" (292mm)
Height: 5.5" (140mm)
COMMENTS: The ball bearings in the Traxxas Slash 4x4 are rubber sealed.
Following are the stock numbers for the replacement bearings from
Traxxas and non-rubber sealed alternatives from Duratrax;
Qty. Size Location Qty. Bearing Set
2 8x12mm Fr Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Fr Hubs 1 TRAC7019 DTXC1511
2 8x12mm Rear Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Rear Hubs 1 TRAC7019 DTXC1511
2 4x8mm Fr Diff 1 TRAC7019 DTXC1511
2 5x8mm Steering Bellcrank 1 DTXC1523
2 4x7mm Rocker Arm Post 2 DTXC1507
4 8x12mm Differentials 2 TRAC7020 DTXC1581
4 4x8mm Differentials 2 TRAC7019 DTXC1511
6 4x8mm Transmission 3 TRAC7019 DTXC1511
2 4x8mm Rear Ring Gear 1 TRAC7019 DTXC1511
&
