Main components and technical parameters:
I SJ-65×30 Single screw extruder Qty: one set
1. Screw barrel material: 38CrMoALA; nitrided depth: 0.5-0.7mm; Qty: one set
2. Barrel is heated by aluminum;
4 heating zones; heating power: 4.5kw/zone;
Cooling power: 4 X0.3 Kw
3. Main motor adopts alternating current motor; power : 37kw
4.High property gearbox has following characteristics: long working life, low-noise, and high-screw etc.
5.Electric controlling part, contactor and relay are made by Schneider, France; temperature meter is made by RKC import products from Japan.
II Mould Qty: one set
1. Type: screw
2. Material: high-quality stainless steel
3. Specification: 20mm~63mm
III SZD-6000 Vacuum calibration box Qty: one set
1. Vacuum pump power: 4kw; Qty: one set
2. Electric pushing rod Qty: one set
3.High pressured water pump power: 3kw; Qty: one set
4.High pressure nozzle material: ABS; Qty: one set
5.Pipe supporter material: nylons 66 and stainless steel; Qty: one set
6.Cooling tank Qty: one set
7.Controlling box main electrical elements are adopted Schneider import products from France and Zhengtai products from China;Qty: one set
IV SZD-6000 spray cooling box Qty: one set
1.Spraying is adopted span peripheral fog shape, which has good cooling effect.
2.Range of the cooling diameter isï¿ 20-110mm
3.Length of the box is 6000mm
4.Water pump power: 3kw; Qty: one set
V SLQ-200 Tractor Qty: one set
1. Center height of the tractor : 1000±20mm
2.Towing speed: 1-9 meters
3.Towing motor power:2.2kw; Qty: one set
4. Effective length of caterpillar band: 1000mm
5.Towing motor adopts frequency regulation.
6. Type of joint of block rubber and caterpillar band: direct, tight by the bolt
VI STG-160 Cutter Qty: one set
1.Circle saw diameter: 350mm; rotation power: 1.1kw
2.Max cutting pipe diameter: 5-110mm
3.Compressed air pressure: 0.5-0.7Mpa
4.Controlling type of Cutter: PLC automatic control, pneumatic advancement
VII Stacker Qty: one set
1.Guidance board: the floor is manufactured by stainless steel.
2. Cylinder Qty: 2 Pc
3.Pneumatic controlling system Qty: one set
4.Cutting limit switch Qty: 2 pcs
