Desk Hearing Aid Cleaner
These vacum hearing aid cleaner of KLM series are the perfect solution for hearing health providers. A desiccator chamber and a professional needle are included, enables fast hearing aid dehumidification, fast clean wax and debris from the sound outlet ports and vent tracks of hearing aids which restores sound and function.
Three FunctionS:
vacuum drying and dehumidification, vacuum dust removal air blowing and dust removal.
Instruction:
Vacuum drying and dehumidification
At first, remove the battery of the hearing aid, then place the hearing aid on the sponge with filtering function and cover the lid, next, close the pressure relief valve.
Next, Turn on the power, and the power indicator light will be always on. Then drawing thechangeover handle , the vacuum pump begin working（See Figure 1）. Until the vacuum pressure gauge indicates the vacuum from rise to stable, the vacuum pump automatically stops after 18 minutes of continuous operation.
After the vacuum pump stops running, if you need to open the vacuum tank cover, you should push the handle first（See Figure 2）. Finally, when the pressure inside tank is balanced, you can easily open the vacuum tank cover.
Vacuum dust removal
Firstly, turn on the power, and the power indicator light will be always on. Then push the changeover handle , the vacuum pump begin working（See Figure 2）
Then carefully move the needle at the suction handle into the microphone and receiver , which are to be cleaned. repeatedly vacuuming until it is clean
Air blowing and dust removal
Firstly, turn on the power, and the power indicator light will be always on. Then push the changeover handle , the vacuum pump begin working（See Figure 2）
Then, the needle for dust absorption toward the part which is to be cleanedand, the dust will be washed away by the airflow.
03-034-03 KLM04A (Time controlled)
Weight：4.2kg
Dimension L×W×H：L280mm×W196mm ×H215mm
ChamberDimension：Φ102mm, H100mm high
Power：220V 50Hz
Function：desiccating、dust absorption, blowing dust
